CPVC Pipes & Fittings

WorldFlow Solvent Cement “WORLDFLOW SOLVENT – TESTED, TRUSTED & UNMATCHED.”

13 October 20256 min read

1. INTRODUCTION

All WorldFlow Solvents are made from 100% Imported PVC Solvents.

It offers three major advantages:

1. Made from 100% imported solvent – it neither vaporizes, nor is affected by heat, nor solidifies. Not even 1 gm of weight is lost.
2. Melts the pipe up to 90–95%, allowing use across different brands of
3. After applying on any PVC pipe, the plumber can rotate and adjust the joint for up to 1 minute as per requirement.

1. Even if the tin is opened multiple times, it does not vaporize or reduce. Example: After using 100–150 ml from a 250 ml tin, if closed properly and opened after 6 months, the remaining solvent will remain in the same condition & quantity – ready to use again.
2. Known as the “Welding Solution” in many cities, because it can repair broken or cracked PVC, UPVC & CPVC pipes.
1. Roughen the broken area & apply solvent.
2. Roughen a piece of same pipe from inside, apply solvent, and paste on broken pipe. Tighten with clamp or wire for 2 hours.
3. After 2 hours, remove clamp/wire – the pipe will be welded & ready to use.

1. Take a 6-inch pipe, apply solvent on both surfaces, and fit an elbow on one side and a T on the other
2. The pipe can rotate for 1 minute, but after that it locks.
3. Leave for 2 hours. Even on a lathe machine, the elbow or T will not separate.

1. Apply solvent on both surfaces and join elbow & T.
2. It rotates for 1–2 minutes, then locks, while the chemical reaction continues.
3. After 2 hours, place the joint in a pressure cooker with 2 liters water.

1. Take out and test on a lathe machine – the joint will not separate.
2. For the very first time 0% gum or 100% gum less and 100% imported PVC, UPVC & CPVC Solvent Cement
3. A Solvent that given a life time guaranty of neither getting vaporized nor becoming / getting thick
4. Despite of using / opening the pack /Tin again & again and after using the solvent more than 60% to 70% still the left over solvent can be used even after six month or even after one year without any problem, hence it never gets vaporized.
5. Best utilization of money is the solve moto of our solvent
6. All over solvents are chemically ecofriendly, hence there is no danger to the hands.
7. All over solvent are made plumber friendly as they give the plumbers the freedom to rotate and adjust the pipe up to one minute as per their convenience.
8. All kind of welding work including breakage, cut, leakage, can be solved using our solvent it is very user
9. Since all our solvents are gum less, hence they easily get fitted in any kind of joint and there is no possibility of the joint lousing its place back.